Shop

Natural Stone Sealer

In stock

£44.99

NCC Natural Stone Sealer is a natural finish Impregnating natural stone sealer developed to be ideal solution for protecting and preventing surface staining on many different types and finishes of permeable natural and reconstituted stone and other mineral paving surfaces. This includes natural sandstones, limestones, granites and slates etc., as well as for other pavers such as exterior quarry tiles, bricks & concrete block paving etc. The science behind the NCC Natural Stone Sealer is that it is a solvent carried acrylic resin based material, as although these are less fashionable, this ensures the best possible penetration and impregnation of your stone surfaces, and to extent and to a lower temperature range than any water–based sealers. NCC Natural Stone Sealer is therefore a very effective surface impregnating sealer that dries with a natural ‘matt’ finish with minimal change to the colour and texture, where it then helps to protect the surface again against staining because it strongly repels water, oil and grease. Technically this means that NCC Natural Stone Sealer is classified as being both Hydrophobic and Oleophobic respectively – However, and very importantly, NCC Natural Stone Sealer is vapour permeable and allows the treated surfaces to transpire, which in turn means that unsightly staining and discoloration due to salts entrapment does not occur.

 

Full Product Info & Downloads

Paving Joint Mortar Mixing Paddle

In stock

£13.25

Paving Joint Mortar Mixing Paddle – A robust steel, helical mixing paddle for the GftK’s resin paving joint mortars, designed to ensure complete and thorough mixing of epoxy resin bound paving jointing mortars including vdw 800, vdw 815+, vdw 850+ and vdw 855. These paddles are sized to fit any good quality, standard form of heavy duty electric drill with a bit to accommodate the 10mm shaft. The drills should only be used on low speeds to mix the mortars for 3 minutes and as specifically stated on their respective Technical Data Sheets (TDS / PDS).

Porcelain Cleaner – Aftercare

In stock

£35.11

Porcelain Cleaner – Aftercare: Despite the impression by many people that external porcelain tile paving will simply retain its good looks, unfortunately this is not the case. In exactly the same way that any indoor tiled areas need to be cleaned regularly to maintain their appearance and good looks, so does all external porcelain tile paving – Otherwise, dirt, staining and green growths will build-up over time and according to the exposure, just as they do on other exposed paved surfaces.

Full Product Info & Downloads

Porcelain Intensive Cleaner

In stock

£37.02
NCC Intensive Porcelain Cleaner is designed to do exactly as the name says and allow you to clean external porcelain tile paving that has suffered a build-up of unwanted dirt, grime and grease etc., as well as surface staining by tannins from plant detritus and the ubiquitous red wine and other delights from external exposure with BBQ’s, Party Nights and of course gardening works etc.
Mild soiling (relatively): Dilute 1:10 parts in warm water and apply liberally with a low-pressure sprayer or apply directly to the affected surface with a scrubbing brush. Agitate with the scrubbing brush, or a so-called boat deck brush, then pressure hose / jet-wash off with clean water. Severe soiling: Dilute 1:3 parts in warm water. Apply liberally using a low-pressure sprayer or apply directly to the affected surface with a scrubbing brush. Leave for 5-10 minutes and then agitate with the scrubbing brush, or a so-called boat deck brush, then pressure hose / jet-wash off with clean water. Repeat if required. Extreme soiling: Apply undiluted using a suitable scrubbing brush, directly onto the affected areas only, then add a little water and agitate with the scrubbing brush, or a so-called boat deck brush. Leave to work for a further 10 minutes or so, then agitate again and finally rinse-off thoroughly with clean water by pressure hose / jet washing.

 

Full Product Info & Downloads

Porcelain Tile Protector

In stock

£72.76
NCC Porcelain Protector is required because, whilst exterior porcelain tiles have a very hard and dense surface that is denser and easier to clean than normal stone and ceramic surfaces, the surface of porcelain tiles can and will still discolour and stain, dirt and grime will build-up and this can be difficult to remove! It is not rocket science but a question of the degree of being ‘easier to clean. plus external porcelain is usually sold as having some degree of slip resistance, well guess what, this is achieved by making the surfaces micro-profiled and textured. This texture increases the dry slip resistance (not wet note!) to meet the standards referenced, BUT will also increase the dirt-pick-up of the surface, as well as making it somewhat harder to clean. It should not really be a surprise, though it often is, as people have read the marketing brochures for porcelain that only focus on the positives!
However there is now a good solution, by using NCC Porcelain Protector to enhance the surface of your paving. The innovative NCC Porcelain Protector is a water dispersed, protective surface treatment for interior and exterior applications on all types of porcelain tile surfaces.

 

Full Product Info & Downloads

Resin Residue Remover

In stock

£49.98

Resin Residue Remover is designed to help you remove all types of resin residues such as those from polymer or epoxy grouts etc., left or spilled onto patios and other paved and tiled, including porcelain, external surfaces. This specially developed cleaning material is a low odour, non-caustic surface treatment that works by softening the residues left by paving jointing compounds and grouts, making their removal from the surface of concrete, natural stone, and porcelain tile paving much easier.

Full Product Info & Downloads

Rust Stain Remover

In stock

£24.45
NCC Rust Stain Remover is an innovative organic formula that is designed specifically to break down and remove surface rust stains for paved surfaces. The advanced organic formulation is non-acidic and therefore it is suitable for use on acid-sensitive materials such as marble (even polished marble), limestone, concrete blocks and reconstituted stone, as well as for use on all common types of natural stone paving including granite, basalt, travertine, sandstone and even light coloured sandstone, as well as on so-called non-staining porcelain tile paving!
NCC Rust Stain Remover acts directly to degrade and remove the stains on the surfaces being treated, removing most rust stains in just 15 minutes – A perfect problem-solving solution!

 

Full Product Info & Downloads

Squeegee Head -250mm Wide – for Wet Slurry Application

In stock

£7.50

Squeegee Head – A medium-heavy duty, wooden backed, 250mm wide rubber squeegee head that is ideal for the application of all of the GftK range of paving jointing mortars including GftK’s vdw 800, vdw 815+, vdw 840+, vdw 850+ and GftK vdw 855. This squeegee head is 250mm wide, because this width makes it easy to control the wet-slurry application of the unique vdw 800 mortars across the paving and into the joints, including around details and edges of the paving. On larger projects and for specialist contractors, there are larger models available online.

Stone Sealer & Enhancer​

In stock

£61.95

NCC Natural Stone Sealer & Enhancer is a translucent, water-dispersed, impregnating, acrylic resin based, paving stone surface sealer and enhancer, which strongly repels water, oil and grease. It has been specially developed for NCC to provide the ideal solution for our customers wishing to seal and protect their natural  sandstones, limestones, granites and slates etc., as well as for other pavers such as exterior quarry tiles, bricks & concrete block paving etc., whilst also enhancing the colour and beauty of the paving. NCC Natural Stone Sealer & Enhancer is designed to prevent surface staining or frost damage, and is a very effective, impregnating sealer that penetrates into line the surface pores and capillaries, where it dries, giving a natural ‘matt’ finish to the surface, which does not change the colour, but can significantly enhance the appearance, according to the type of stone paving. Technically NCC Natural Stone Sealer  & Enhancer is classified as being both ‘Hydrophobic’ (repels water and water borne dirt and contaminants), and it is also ‘Oleophobic’ (repels oils and grease), which make this an excellent paving sealer.

Additionally, and very importantly, NCC Natural Stone Sealer & Enhancer also allows the treated surfaces to continue to breathe (or technically to transpire), which means that the surface allows each way water vapour diffusion in accordance with standard building physics, and as a result, unsightly staining and discoloration due to salts entrapment does not occur.

 

Full Product Info & Downloads

Water-based Paving & Patio Sealer

In stock

£57.64

NCC Water-based Paving and Patio Sealer is a natural finish Impregnating sealer that is also suitable for internal areas and for vertical as well as horizontal applications to impregnate and seal natural stone and other mineral finishes. These include the surfaces of all types of porous natural stone, reconstituted stone, and other mineral surfaces, including sandstone, limestone, granite slate, marble, quarry tiles, bricks & concrete paving etc.

NCC Water-based Paving and Patio Sealer dries with a natural finish and minimal change to the natural stone colour and texture, the surfaces can then strongly repel water, oils, and grease, which helps to protect against damage by frost action and to prevent staining

Full Product Info & Downloads