- Apply NCC Resin Residue Remover liberally by dabbing on with a suitable paint brush. Work in small manageable areas at a time and do not brush out, leaving the solution to work for up to 30 minutes, but Do Not allow the solution to dry out. If drying should or looks like it is going to occur within this 30 mins, simply apply a little more of the solution to keep it wet.
- After 30 minutes, use a stiff short haired brush to pick-up and remove the softened resin material from the surface. Repeat the process as necessary if any unwanted polymer / resin material remains.
- Clean the overall paved / porcelain tiled surfaces using NCC Grime Remover diluted 1:10 in warm water. Apply with a light pressure sprayer on larger areas, or simply with a scrubbing brush. Agitate the surface using a scrubbing brush or a so-called boat deck brush can be good. Finally rinse the surfaces thoroughly using a hose / nozzle and clean water.
Resin Residue Remover
Resin Residue Remover is designed to help you remove all types of resin residues such as those from polymer or epoxy grouts etc., left or spilled onto patios and other paved and tiled, including porcelain, external surfaces. This specially developed cleaning material is a low odour, non-caustic surface treatment that works by softening the residues left by paving jointing compounds and grouts, making their removal from the surface of concrete, natural stone, and porcelain tile paving much easier.