Porcelain Cleaner – Aftercare: Despite the impression by many people that external porcelain tile paving will simply retain its good looks, unfortunately this is not the case. In exactly the same way that any indoor tiled areas need to be cleaned regularly to maintain their appearance and good looks, so does all external porcelain tile paving – Otherwise, dirt, staining and green growths will build-up over time and according to the exposure, just as they do on other exposed paved surfaces.
NCC Porcelain Cleaner for Aftercare is a pH Neutral cleaner, specially developed to help you do just this and in case you are wondering, yes this product is safe and suitable to use indoors as well as externally for porcelain tiled surfaces. The gentle but very effective action, means that where necessary it can be used everyday and it is also very cost effective as it is diluted by from 1 to 10, up to 1 to 30 with warm clean water for use.
NCC Porcelain Cleaner for Aftercare is suitable for the frequent cleaning of a wide range of hard surfaces, including natural stone paving and ceramic tiles, as well as all types of porcelain tiles, leaving the area with a fresh clean fragrance. Due to its gentle but effective action it is suitable for use on both sealed and unsealed, polished and unpolished surfaces.
Directions for use
1. For Manual Applications: Dilute 2 or 3 capfuls NCC Porcelain Cleaner (you can use 5 capfuls on dirtier areas) in a standard bucket with ~5-7Litres of warm water. Mop the surfaces in a normal floor cleaning way and allow to dry. NCC Porcelain Cleaner for Aftercare does not require rinsing. Highly polished surfaces should be gently buffed using a clean dry cloth to a perfect finish.
2. For Machine application (scrubber drier types}:
Dilute NCC Porcelain Cleaner according to the level of cleaning power required as follows:
1 : 1O in warm water for heavily soiled surfaces (use NCC Porcelain Cleaner – Intensive for seriously stained surfaces)
1 : 20 in warm water for typical / medium soiled surfaces
1 : 30 in warm water for enhancing and lightly soiled surfaces
Set the machine release rate for the cleaning solution to normal, then proceed to scrub the surfaces and remove / extract the used solution as normal for the machine.
Additional Important Note: On polished surfaces use the lightly soiled dilution ratio, and on both polished surfaces & highly glazed tiles, finish by dry buffing as normal.
Consumption / Coverage (per litre): 5 litres of NCC Porcelain Cleaner for Aftercare can produce enough cleaning solution to wash an area of 20 m2 approximately 200 times, making it very cost effective too!
